棋牌游戏平台-威尼斯官方网站平台-登录

服务热线:

15589951055

联系人:吴经理

企业地址:济南市历城区祝甸

电话:18615250275(王经理)

座机:0531-88988260

QQ:397332759/970020424

纸质印刷棋牌游戏平台的质量要求有哪些?

来源:   日期:2021-05-12

棋牌游戏平台印刷纸的平滑度:平滑度是纸张更重要的印刷性能。哪种印刷方法是不湿润的。手袋印刷品的轮廓和印在光滑纸张上的图像清晰可见。这是因为平滑的纸张可以更好地接触到印版,从而可以获得印版上的油墨。这些层均匀地转移到纸张表面。由于纸张表面不稳定,平滑度低的纸张不能均匀地接触到印版,油墨层不能很好地转移到纸张表面,导致印刷品的虚假,影响印刷质量。

Smoothness of printing paper for handbag: smoothness is the most important printing performance of paper. Which printing method is not wet. The outline of the printed bag and the image printed on smooth paper are clearly visible. This is because the smooth paper can better contact with the printing plate, so you can get the ink on the printing plate. These layers are evenly transferred to the surface of the paper. Due to the instability of the paper surface, the paper with low smoothness can not contact the printing plate evenly, and the ink layer can not be transferred to the paper surface well, which leads to the false printing and affects the printing quality.
图片
picture
棋牌游戏平台印刷纸含水量:手袋印刷纸含水量的多少也会影响印刷质量。如果纸中含有更多的水,纸的强度就会降低。在外力的作用下,纤维被拉出,塑性增强,影响压印的干燥速度。如果纸张含水量太少,纸张就会脆化,容易造成损坏,而且手袋印刷时也会产生静电。
济南棋牌游戏平台印刷
Moisture content of printing paper for handbag: the moisture content of printing paper for handbag will also affect the printing quality. If there is more water in the paper, the strength of the paper will decrease. Under the action of external force, the fiber is pulled out and the plasticity is enhanced, which affects the drying speed of the imprint. If the water content of the paper is too small, the paper will be brittle, easy to cause damage, and handbag printing will also produce static electricity.
棋牌游戏平台印刷纸的吸墨性:纸张的吸墨性是指纸张吸墨的程度。纸张吸取的墨水越多,纸张吸取的墨水越多,反之亦然。
Ink absorption of paper: ink absorption of paper refers to the degree of ink absorption of paper. The more ink paper absorbs, the more ink paper absorbs, and vice versa.
纸张对油墨的吸取率主要取决于纸张纤维之间间隙的大小,即纸张的紧密性。如果纸纤维之间的空间太小,油墨吸取就会很差,反之亦然。在印刷过程中,纸张的吸墨量应适中。因为当纸张吸墨量太少时,很容易出现印痕不清或不明显,过大会产生模煳、透印现象。
The absorptivity of paper to ink mainly depends on the size of the gap between the paper fibers, that is, the compactness of the paper. If the space between the paper fibers is too small, ink absorption will be very poor, and vice versa. In the printing process, the ink absorption of the paper should be moderate. Because when the paper ink absorption is too small, it is easy to appear unclear or not obvious, too often produce mold burn, through printing phenomenon.


棋牌游戏平台|威尼斯官方网站平台

XML 地图 | Sitemap 地图